VoQab/Pico-LCD-1.8.py

from machine import Pin,SPI,PWM
import framebuf
import time

BL = 13
DC = 8
RST = 12
MOSI = 11
SCK = 10
CS = 9


class LCD_1inch8(framebuf.FrameBuffer):
    def __init__(self):
        self.width = 161
        self.height = 130
        
        self.cs = Pin(CS,Pin.OUT)
        self.rst = Pin(RST,Pin.OUT)
        
        self.cs(1)
        self.spi = SPI(1)
        self.spi = SPI(1,1000_000)
        self.spi = SPI(1,10000_000,polarity=0, phase=0,sck=Pin(SCK),mosi=Pin(MOSI),miso=None)
        self.dc = Pin(DC,Pin.OUT)
        self.dc(1)
        self.buffer = bytearray(self.height * self.width * 2)
        super().__init__(self.buffer, self.width, self.height, framebuf.RGB565)
        self.init_display()
        

        self.WHITE = 0xFFFF
        self.BLACK = 0x0000
        self.GREEN = 0x001F
        self.BLUE = 0xF800
        self.RED = 0x07E0

        
    def write_cmd(self, cmd):
        self.cs(1)
        self.dc(0)
        self.cs(0)
        self.spi.write(bytearray([cmd]))
        self.cs(1)

    def write_data(self, buf):
        self.cs(1)
        self.dc(1)
        self.cs(0)
        self.spi.write(bytearray([buf]))
        self.cs(1)

    def init_display(self):
        """Initialize dispaly"""  
        self.rst(1)
        self.rst(0)
        self.rst(1)
        
        self.write_cmd(0x36);
        self.write_data(0x70);
        
        self.write_cmd(0x3A);
        self.write_data(0x05);

        #ST7735R Frame Rate
        self.write_cmd(0xB1);
        self.write_data(0x01);
        self.write_data(0x2C);
        self.write_data(0x2D);

        self.write_cmd(0xB2);
        self.write_data(0x01);
        self.write_data(0x2C);
        self.write_data(0x2D);

        self.write_cmd(0xB3);
        self.write_data(0x01);
        self.write_data(0x2C);
        self.write_data(0x2D);
        self.write_data(0x01);
        self.write_data(0x2C);
        self.write_data(0x2D);

        self.write_cmd(0xB4); #Column inversion
        self.write_data(0x07);

        #ST7735R Power Sequence
        self.write_cmd(0xC0);
        self.write_data(0xA2);
        self.write_data(0x02);
        self.write_data(0x84);
        self.write_cmd(0xC1);
        self.write_data(0xC5);

        self.write_cmd(0xC2);
        self.write_data(0x0A);
        self.write_data(0x00);

        self.write_cmd(0xC3);
        self.write_data(0x8A);
        self.write_data(0x2A);
        self.write_cmd(0xC4);
        self.write_data(0x8A);
        self.write_data(0xEE);

        self.write_cmd(0xC5); #VCOM
        self.write_data(0x0E);

        #ST7735R Gamma Sequence
        self.write_cmd(0xe0);
        self.write_data(0x0f);
        self.write_data(0x1a);
        self.write_data(0x0f);
        self.write_data(0x18);
        self.write_data(0x2f);
        self.write_data(0x28);
        self.write_data(0x20);
        self.write_data(0x22);
        self.write_data(0x1f);
        self.write_data(0x1b);
        self.write_data(0x23);
        self.write_data(0x37);
        self.write_data(0x00);
        self.write_data(0x07);
        self.write_data(0x02);
        self.write_data(0x10);

        self.write_cmd(0xe1);
        self.write_data(0x0f);
        self.write_data(0x1b);
        self.write_data(0x0f);
        self.write_data(0x17);
        self.write_data(0x33);
        self.write_data(0x2c);
        self.write_data(0x29);
        self.write_data(0x2e);
        self.write_data(0x30);
        self.write_data(0x30);
        self.write_data(0x39);
        self.write_data(0x3f);
        self.write_data(0x00);
        self.write_data(0x07);
        self.write_data(0x03);
        self.write_data(0x10);

        self.write_cmd(0xF0); #Enable test command
        self.write_data(0x01);

        self.write_cmd(0xF6); #Disable ram power save mode
        self.write_data(0x00);

        #sleep out
        self.write_cmd(0x11);
        #DEV_Delay_ms(120);

        #Turn on the LCD display
        self.write_cmd(0x29);

    def show(self):
        self.write_cmd(0x2A)
        self.write_data(0x00)
        self.write_data(0x01)
        self.write_data(0x00)
        self.write_data(0xf1)
        
        
        
        self.write_cmd(0x2B)
        self.write_data(0x00)
        self.write_data(0x01)
        self.write_data(0x00)
        self.write_data(0xf1)
        
        self.write_cmd(0x2C)
        
        self.cs(1)
        self.dc(1)
        self.cs(0)
        self.spi.write(self.buffer)
        self.cs(1)
  
if __name__=='__main__':
    pwm = PWM(Pin(BL))
    pwm.freq(1000)
    pwm.duty_u16(65535)#max 65535

    LCD = LCD_1inch8()
    print("Initialized!")
    #color BRG
    LCD.fill(LCD.BLUE)
    LCD.show()
    print("Filling with BLUE and waiting for 2sec...")
    time.sleep(2)
    
    print("Making red rectangles")
    LCD.fill_rect(0,0,160,20,LCD.RED)
    LCD.rect(0,0,160,20,LCD.RED)
    LCD.text("Raspberry Pi Pico",2,8,LCD.WHITE)
    
    LCD.fill_rect(0,20,160,20,LCD.BLUE)
    LCD.rect(0,20,160,20,LCD.BLUE)
    LCD.text("PicoGo",2,28,LCD.WHITE)
    
    LCD.fill_rect(0,40,160,20,LCD.GREEN)
    LCD.rect(0,40,160,20,LCD.GREEN)
    LCD.text("Pico-LCD-1.8",2,48,LCD.WHITE)
    
    LCD.fill_rect(0,60,160,10,0X07FF)
    LCD.rect(0,60,160,10,0X07FF)
    LCD.fill_rect(0,70,160,10,0xF81F)
    LCD.rect(0,70,160,10,0xF81F)
    LCD.fill_rect(0,80,160,10,0x7FFF)
    LCD.rect(0,80,160,10,0x7FFF)
    LCD.fill_rect(0,90,160,10,0xFFE0)
    LCD.rect(0,90,160,10,0xFFE0)
    LCD.fill_rect(0,100,160,10,0XBC40)
    LCD.rect(0,100,160,10,0XBC40)
    LCD.fill_rect(0,110,160,10,0XFC07)
    LCD.rect(0,110,160,10,0XFC07)
    LCD.fill_rect(0,120,160,10,0X8430)
    LCD.rect(0,120,160,10,0X8430)


            
            
    LCD.show()
    time.sleep(1)
    LCD.fill(0xFFFF)