New version number

.gitignore

@@ -1,2 +1,3 @@
 config.ini
+tasmotonov-gui-config.json
 __pycache__/

tasmotonov-gui.py

@@ -20,7 +20,7 @@ along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 import sys
 import tasmotonov
-import configparser
+import json
 from PySide6.QtUiTools import QUiLoader
 from PySide6.QtWidgets import QApplication,QFileDialog
 from PySide6.QtCore import QFile, QUrl, QIODevice
@@ -29,35 +29,41 @@ from PySide6.QtCore import QFile, QUrl, QIODevice
 filename = ""
 action = "toggle"
 
-def load_config(file="config.ini"):  # load config from configparser.ConfigParser object
+def load_config(file="tasmotonov-gui-config.json"):  # load config from configparser.ConfigParser object
-    to_load = configparser.ConfigParser()
+    try:
-    to_load.read(file)
+        with open(file, "r") as f:
+            to_load = json.loads(f.read())
         global filename, action
-    if "DEFAULT" in to_load:
+        if "file" in to_load:
-        if "file" in to_load['DEFAULT']:
+            filename = to_load['file']
-            filename = to_load['DEFAULT']['file']
             if filename != "":
                 try:
                     tab1_load_file()
                 except FileNotFoundError:
                     tab1_clear()
-        if "inline" in to_load['DEFAULT']:
+        if "inline" in to_load:
-            window.tab2_plainTextEdit.setPlainText(to_load['DEFAULT']['inline'])
+            window.tab2_plainTextEdit.setPlainText(to_load['inline'])
-        if "action" in to_load['DEFAULT']:
+        if "action" in to_load:
-            a_new = to_load['DEFAULT']['action']
+            a_new = to_load['action']
             if a_new != "":
                 action = a_new
-    # else: no config there yet
+        if "tab_index" in to_load:
-def save_config(file="config.ini"):
+            tab_index = to_load["tab_index"]
+            if type(tab_index) == int and (0 <= tab_index < window.tabWidget.count()):
+                window.tabWidget.setCurrentIndex(to_load["tab_index"])
+    except FileNotFoundError:
+        pass  # no config there yet
+    
+def save_config(file="tasmotonov-gui-config.json"):
     window.tab3_textBrowser.append("Saving configuration!")
     global filename, action
-    to_save = configparser.ConfigParser()
+    to_save = {}
-    to_save['DEFAULT'] = {}
+    to_save['file'] = str(filename)
-    to_save['DEFAULT']['file'] = str(filename)
+    to_save['inline'] = str(window.tab2_plainTextEdit.toPlainText())
-    to_save['DEFAULT']['inline'] = str(window.tab2_plainTextEdit.toPlainText())
+    to_save['action'] = str(action)
-    to_save['DEFAULT']['action'] = str(action)
+    to_save['tab_index'] = window.tabWidget.currentIndex()
-    with open(file, 'w') as configfile:
+    with open(file, 'w') as f:
-        to_save.write(configfile)
+        f.write(json.dumps(to_save))
 
 # tab1 slots
 def tab1_load_file_pressed():
@@ -76,7 +82,14 @@ def tab1_load_file():
     window.tab1_label_help.show()
     # clear listWidget and add the items
     window.tab1_listWidget.clear()
-    window.tab1_listWidget.addItems(tasmotonov.TasmotonovRunner("file", filename, action, False, False).get_addresses())
+    addresses = tasmotonov.TasmotonovRunner("file", filename, action, False, False).get_addresses()
+    items_to_add = []
+    for address, comment in addresses.items():
+        if comment == "":
+            items_to_add.append(address)
+        else:
+            items_to_add.append(f"{comment} [{address}]")
+    window.tab1_listWidget.addItems(items_to_add)
 def tab1_clear():
     global filename
     filename = ""
@@ -107,7 +120,14 @@ def tab2_plainTextEdit_change():
     content = window.tab2_plainTextEdit.toPlainText()
     if content != "":
         tasmotonov_runner = tasmotonov.TasmotonovRunner("inline", content, action, False, False)
-        window.tab2_listWidget.addItems(tasmotonov_runner.get_addresses())
+        addresses = tasmotonov_runner.get_addresses()
+        items_to_add = []
+        for address, comment in addresses.items():
+            if comment == "":
+                items_to_add.append(address)
+            else:
+                items_to_add.append(f"{comment} [{address}]")
+        window.tab2_listWidget.addItems(items_to_add)
         window.tab3_textBrowser.append(str(tasmotonov_runner.logger.log_string))
 def tab2_action():
     content = window.tab2_plainTextEdit.toPlainText()

tasmotonov.py

@@ -20,10 +20,11 @@ along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 import argparse        # to parse the cli args!
 import requests        # needed to access the http endpoints
+import threading       # for running the requests simultaneously
 import ipaddress       # to validate IP addresses
 from fqdn import FQDN  # validate FQDNs
 
-version = "v1.1.0"
+version = "v1.2.0"
 
 
 # some helpers / utils
@@ -99,99 +100,103 @@ class TasmotonovRunner:
             raise ValueError(error_string)
         
         self.logger.log(f'Initialized runner: source={source}, data={data}, action={action}, verbose={verbose}')
-        self.tasmota_addresses = self.remove_invalid_addresses(self.clean_addresses(self.parse_addresses()))  # returns a list 
+        self.set_valid_addresses_and_comments(self.parse_addresses())
+        self.logger.log(f'Validated addresses: distilled the following data. Devices added: {self.tasmota_addresses}')
         
     def parse_addresses(self):
         # convert the given adresses to a list
-        tasmota_addresses = []
+        tasmota_addresses_raw = []
         if self.source == 'file':
             try:
                 self.logger.log('Now trying to open the given file...', end='')
                 with open(self.data, 'r') as file:
                     contents = file.read()
-                    if ';' in contents:
+                    if ',' in contents:
-                        tasmota_addresses = contents.split(';')
+                        tasmota_addresses_raw = contents.split(',')
-                    elif ',' in contents:
+                    elif ';' in contents:
-                        tasmota_addresses = contents.split(',')
+                        tasmota_addresses_raw = contents.split(';')
                     elif '\n' in contents:
-                        tasmota_addresses = contents.split('\n')
+                        tasmota_addresses_raw = contents.split('\n')
-                    elif ' ' in contents:
-                        tasmota_addresses = contents.split(' ')
                     else:
-                        tasmota_addresses = [contents]
+                        tasmota_addresses_raw = [contents]
                 self.logger.log('Done.')
-                self.logger.log(f'Collected addresses: {tasmota_addresses}')
+                self.logger.log(f'Collected addresses: {tasmota_addresses_raw}')
             except FileNotFoundError as e:
                 self.logger.log_error(f'Failed reading addresses. File with the path "{self.data} can\'t be opened because it doesn\'t exist. Exiting.')
                 raise e
 
         elif self.source == 'inline':
             self.logger.log('Now reading from inline... ', end='')
-            if ';' in self.data:
+            if ',' in self.data:
-                tasmota_addresses = self.data.split(';')
+                tasmota_addresses_raw = self.data.split(',')
-            elif ',' in self.data:
+            elif ';' in self.data:
-                tasmota_addresses = self.data.split(',')
+                tasmota_addresses_raw = self.data.split(';')
             elif '\n' in self.data:
-                tasmota_addresses = self.data.split('\n')
+                tasmota_addresses_raw = self.data.split('\n')
-            elif ' ' in self.data:
-                tasmota_addresses = self.data.split(' ')
             else:
-                tasmota_addresses = [self.data]
+                tasmota_addresses_raw = [self.data]
             self.logger.log('Done.')
-            self.logger.log(f'Collected addresses: {tasmota_addresses}')
+            self.logger.log(f'Collected addresses: {tasmota_addresses_raw}')
+        return tasmota_addresses_raw
         
-        return tasmota_addresses
+    def set_valid_addresses_and_comments(self, tasmota_addresses_raw):        
-    
-    def clean_addresses(self, addresses_raw):
-        # clean them up (e.g. remove newlines if the file has a random newline somewhere
-        tasmota_addresses_cleaned = []
-        for address in addresses_raw:
-            to_add = address.replace('\n', '').replace(';', '').replace(',', '').replace(' ', '')
-            if to_add != '':
-                tasmota_addresses_cleaned.append(to_add)
-        return tasmota_addresses_cleaned
-        
-    def remove_invalid_addresses(self, addressse_raw):
         # now check data for consistency and integrity (is it really an ip address or a domain name?)
         # remove the ones that are not valid and log a warning
-        tasmota_addresses_validated = []
+        tasmota_addresses_validated = {}
         self.logger.log('Now validating given addresses...')
-        for address in addressse_raw:
+        for address in tasmota_addresses_raw:
-            if is_ip(address) or is_fqdn(address):
+            address_split = address.split("#")  # split to separate existing comments
-                tasmota_addresses_validated.append(address)
+            address_cleaned = address_split[0].replace('\n', '').replace(';', '').replace(',', '').replace(' ', '')
+            if len(address_split) > 1:
+                comment = address.split("#")[-1].lstrip()
             else:
-                self.logger.log_warning(f'The address "{address}" is neither a valid IP address nor a FQDN / domain name; SKIPPING THIS ONE.')
+                comment = ""
-        self.logger.log('Validated given adddresses.')
+            if address_cleaned != "":
+                if is_ip(address_cleaned) or is_fqdn(address_cleaned):
+                    tasmota_addresses_validated[address_cleaned] = comment
+                else:
+                    self.logger.log_warning(f'The address "{address_cleaned}" (comment: "{comment}") is neither a valid IP address nor a FQDN / domain name; SKIPPING THIS ONE.')
         
-        return tasmota_addresses_validated
+        self.tasmota_addresses = tasmota_addresses_validated
     
     # some getters
     def get_addresses(self):
         return self.tasmota_addresses
     def get_address(self, index):
-        return self.tasmota_addresses[index]
+        return {list(self.tasmota_addresses.keys())[index]: list(self.tasmota_addresses.values())[index]}
 
     def run_custom_action(self, action):
         # and finally turn on or off or toggle the lights!
-        for address in self.tasmota_addresses:
+        def thread_runner(address):
-            self.logger.log('Running the action "{action}" on the following device: {address}')
+            self.logger.log(f'Running the action "{action}" on the following device: {address}')
             try:
                 answer = requests.get(f'http://{address}/cm?cmnd=Power%20{str(action).lower()}')
                 success = True
             except requests.exceptions.ConnectionError:
                 self.logger.log_warning(f'Could not connect to "{address}". Skipping...')
                 success = False
-            if answer.status_code != 200:
+            if not str(answer.status_code).startswith("20"):
-                self.logger.log_warning(f'{address} returned the following non-200 status code: {answer.status_code}. Skipping...')
+                self.logger.log_warning(f'{address} returned the following non-20x status code: {answer.status_code}. Skipping...')
                 success = False
             if success:
                 self.logger.log_success(f"Ran action {str(action).upper()} on {self.logger.COLORS['OKCYAN']}{address}{self.logger.COLORS['ENDC']} successfully.")
+        
+        threads = []
+        for address in list(self.tasmota_addresses.keys()):
+            t = threading.Thread(target=thread_runner, args=(address,))
+            threads.append(t)
+            t.start()
+        # wait for all threads to finish execution
+        for t in threads:
+            t.join()
+            
+        
     def run(self):
         self.run_custom_action(self.action)
     
     def run_single_custom_action(self, index, action):
-        address = self.tasmota_addresses[index]
+        address = list(self.tasmota_addresses.keys())[index]
-        self.logger.log('Running the action "{action}" on the following device: {address}')
+        self.logger.log(f'Running the action "{action}" on the following device: {address}')
         try:
             answer = None
             answer = requests.get(f'http://{address}/cm?cmnd=Power%20{str(action).lower()}')
@@ -217,10 +222,10 @@ if __name__ == '__main__':
                         prog='Tasmotonov - simply toggle multiple tasmota lights',
                         formatter_class=argparse.RawDescriptionHelpFormatter,
                         description='A very simple script which allows you to turn on/off multiple tasmota devices specified.',
-                        epilog='Info: if you choose a file as source, this files needs to contain the addresses of the tasmota devices either comma-separated, semicolon-separated, space-separated, or newline-separated!\n\n© Benjamin Burkhardt, 2025')
+                        epilog='Info: if you choose a file as source, this files needs to contain the addresses of the tasmota devices either comma-separated, semicolon-separated, or newline-separated (each entry can have a comment starting with a # (hashtag)!\n\n© Benjamin Burkhardt, 2025')
 
     parser.add_argument('source', help='Select either to read the adresses (of the devices) from a "file" or from "inline"', choices=['file', 'inline'])
-    parser.add_argument('data', help='Either the path to the file, or a comma-, space- or semicolon-separated list of tasmota adresses.')
+    parser.add_argument('data', help='Either the path to the file, or a comma-, semicolon- or newline-separated list of tasmota adresses.')
     parser.add_argument('action', help='Select to turn all tasmota devices "on" or "off" or "toggle" (case insensitive)', choices=['on', 'off', 'toggle'])
     parser.add_argument('-v', '--verbose', help='Turn on verbose file output', action='store_true')
     parser.add_argument('--version', action='version', version=f'Tasmotonov.py {version}')